Autonomy in routine
QualiChart Premium
IQC management with follow-up after implementation for your team to explore the tool.
Discover PremiumIQC software for clinical laboratories
IQC for laboratories.
Clarity in every decision.
Levey-Jennings charts, Westgard rules and documented investigations. All the information, in the right place.
Your quality control, in one view.3 levels · active control
More than 1,400laboratories supported
28 yearsdedicated to quality control
Supporttechnical and scientific
The IQC in practice
From alert to investigation.
01 / Active control
Deviation appears. You know where to look.
Compare three levels on the Levey-Jennings graph and see Westgard rule violations along with runs.
In this example: level 2 above +3 SD, with violation of the 1:3s rule.
Try for 30 days02 / Critical review
From violated rule to documented action.
Investigate nonconformity, select causes and record corrective action in run context.
Rule, cause, action and date gathered to accompany the decision.
Try for 30 days
03 / AI Assistant
More context to investigate the issue.
Consult suggestions for causes and next steps following a run with a broken rule, within the critical analysis itself.
AI supports research. The assessment and decision rest with your team.
Try for 30 days
Beyond control runs
Quality goes through the entire routine.
Analytical sigma, qualitative and semi-quantitative controls, critical supplies, temperature and audits: see what else your team can follow in QualiChart.
Analytical sigma NewQualitative and semi-quantitative NewCritical supplies NewEquipment and temperatureInternal audits
Analytical sigma
Analytical performance in a single number.
QualiChart calculates the sigma of each level using the TEa registered for the analyte, the bias against the package insert target and the cumulative CV: σ = (TEa% − |bias%|) / CV%.
- Sigma by level on the control panel
- Monthly evolution by lot, with the 6σ threshold
- Percentage TEa, absolute TEa or both, with the source
Qualitative and semi-quantitative
Also for results that are not numbers.
Qualitative analytes are evaluated against the expected result. Semi-quantitative analytes, against an acceptable range on an ordered scale, such as Negative, Trace and 1+ to 4+.
- Conforming or nonconforming before saving
- Acceptable range per level on an ordered scale
- Trend alert and chart on the scale
Critical supplies
Every lot, from receipt to the runs in which it was used.
Reagents, calibrators and critical consumables follow their life cycle in the system: approved supplier, receipt, acceptance, use on controls and closure, always with the next step indicated.
- Qualified suppliers and lot acceptance
- Lot recorded automatically on every run
- Incidents, traceability and 13 reports
Equipment and temperature
Caution continues outside the analyzer.
Track refrigerators and other equipment with defined limits, measurement history and records of who took each reading.
- Graph with limits and out-of-range readings
- Observations for recording occurrences and interventions
- History by equipment, period and responsible
Internal audits
See what's covered. And what needs action.
Evaluate the routine with checklists, gather evidence and track nonconformities in a report by category.
- Results and scores by category
- Non-conformities with audit observations
- Action plan and PDF report export
A story built with laboratories.
Laboratories that have already used QualiChart.
In a laboratory routine
From the people
who use it.
Laboratory
Paulo C. Azevedo
The system gave us an overview of control in all laboratory units, which gives us the possibility of anticipating problems through real-time data analysis.
A plan for your needs
Monitoring makes the difference.
Scientific support
QualiChart PLUS
Premium features scientific advice to support interpretation and technical decisions.
Get to know PLUSApplied teaching
QualiChart Edu
License for teachers and institutions teaching laboratory quality control.
Meet EduApplied knowledge
From reading to the bench.
Guides, articles and materials to work on quality control with your team.
A Biosoft solution. Discover our history.
To study with the team
Levey-Jennings Graph Interpretation Exercises
Explore MaterialDoes your team use spreadsheets today?
Fewer files to check. More context to decide.
Compare how investigation results, formulas, permissions, and records are maintained in a spreadsheet and a dedicated system.
- Graphs and calculations along with control data
- Investigation and actions on run history
- Shared routine with per-user access
How much does it cost?
The price depends on the number of units and equipment, in addition to the plan and monitoring chosen. Therefore, prices are upon request. Request a proposal with the scope of your laboratory.
How does deployment work?
In the demonstration, we show the routine and data that you already use. The team combines the setup and training outlined in the plan. The schedule depends on this survey.
Can I exit the spreadsheet?
The system offers import of runs via CSV file. The team guides the format and evaluates the data available for the transition.
Compare with Spreadsheets DoesIntegrate with my LIS or equipment?
Enter the manufacturer, model and export format. Compatibility needs to be assessed for your environment prior to hiring.
Understand integrationHow is data processed?
Access to the system is via user account and HTTPS connection. The Privacy Policy describes data processing and the channels for exercising your rights under the LGPD. Ask the team for the data storage, backup, access and processing conditions applicable to your contract.
Security and privacyCan I test before hiring?
Yes. You can create an account and evaluate the system for 30 days free of charge. You can also request a guided demonstration. The commercial proposal informs users, equipment, validity, billing and cancellation rules before contracting.
Start my 30-day trialYour next step in quality control
Put QualiChart to the test. Free for 30 days.
Create your account and evaluate QualiChart in your laboratory. Do you prefer a guided introduction? Request a demo with our team.